![]() | |
|
A harvester self-propelled GS-8.6
|
|
|
The harvester is intended for cleaning
grain, grains and leguminous cultures in a stage of wax ripeness in all
soil-climatic zones where separate cleaning is applied.
The harvester provides a cut and stacking of the cut off weight in sheaf at the left, in the middle or on the right. In world practice at separate harvesting the complex of machines consisting of a productive self-propelled harvester and a combine, used for selection and jolting sheafs is applied. Separate cleaning of grain crops is considered one of effective ways of decrease in losses at cleaning the littered and non-uniformly ripening bread. She allows to begin earlier for some days cleaning bread. Thus general intensity of the harvest company is reduced, productivity of combines on selection sheafs increases, losses of grain from it strews are reduced. At stacking it is shaky in the central window sheaf has the form of a tent, it is steady on sterne and quickly dries. Now, owing to reduction in some times actual norms of entering of herbicides, poor quality of seed fund, decrease in quality processing of ground, etc., the contamination of crops of grain crops has sharply increased. It compels facilities to apply more often separate cleaning so, that its share now in Russia exceeds 50 % of the areas, and value valkovyh harvesters much more grows. The harvester self-propelled GS-8.6 manufactures "SARMAT", is capable to double sheaf from 17 meters that allows not only to raise productivity at work on sval in 2-3 times, and at selection sheafs in 1,5 times, but also considerably to lower the charge of the PETROLEUM PRODUCTS, to reduce loss of grain. At cleaning grain productivity of a harvester makes from 8.2 up to 10 ga. At an o'clock, thus the charge of the PETROLEUM PRODUCTS does not exceed 890-950 gr. On 1 ga. Besides the resource of a combine considerably increases. In fact work of a combine on sval on the raised speeds and partial loading of mechanisms put out of action thresher the unit of a combine on which restoration additional expenses are required. The offered model of a harvester on design features, reliability, does not concede productivity to a similar Canadian harvester "Western - 200". Harvester GS-8,6 will allow not only to reduce terms of carrying out of harvest works, having lowered thus loading on one combine, but also considerably to reduce financial and material inputs of agricultural productions. The responses received from heads of the enterprises in which harvester GS-8.6 is used, allow to recommend her as the reliable, productive and economic domestic agricultural machinery being analogue of the Canadian harvester " the Western - 200 ". One of basic advantages GS-8.6 is application on a harvester of accessories of extremely domestic production, that in turn essentially reduces cost of its service. |
|
|
Specifications
| |
|
Productivity for 1 hour, ga
| 8,2 |
Width of capture, m | 8,6 |
Working speed of movement on the basic technological operations, km/h | 2...12 |
Transport speed | 30 |
Height of a cut of stalks, mm | 50...220 |
Sval | Left, right, central |
The cutting device | Segments jagged, fingers forged |
A reel |
Metal, five blades, with wooden rods
|
A cloth | Rubberized with strengthening rods |
A drive of a harvester from a cabin | Mechanical - on knifes, Hydraulic - on the conveyor and a reel. |
Transmission | A box of transfers eight-high-speed with a reverser on all transfers. Brakes tape, dry. |
A cabin | An adjustable seat and a sterring wheel, the air conditioner and a heater. |